Flame Detector for Lighter

The flame detector is used to detect the invisible light radiation that is visible or not in the atmosphere when the substance burns, while generating smoke and heat.
Flame detector, also known as photosensitive fire detector, is a fire detector used to respond to the light characteristics of fire, that is, to detect the light intensity of flame combustion and the flicker frequency of flame.
classification
According to the optical characteristics of the flame, there are three kinds of flame detectors: one is the ultraviolet detector sensitive to the ultraviolet radiation with short wavelength in the flame; The other is the infrared detector which is sensitive to the longer wavelength infrared radiation in the flame; The third is a UV / IR hybrid detector that simultaneously detects ultraviolet with shorter wavelength and infrared with longer wavelength in the flame.
According to the detection band, it can be divided into: single ultraviolet, single infrared, double infrared, triple infrared, infrared / ultraviolet, additional video and other flame detectors.
According to the explosion-proof type, it can be divided into flameproof type and intrinsically safe type.
For the 0.185 ~ 0.260 micron wavelength ultraviolet light generated in flame combustion, a solid substance can be used as the sensitive element, such as silicon carbide or aluminum nitrate, or an inflatable tube can be used as the sensitive element, such as Geiger Maitreya tube.
For the 2.5 ~ 3 micron wavelength infrared generated by the flame, the sensor made of aluminum sulfide can be used, and for the 4.4 ~ 4.6 micron wavelength infrared generated by the flame, the sensor made of lead selenide or aluminum tantalate can be used. Different sensors can be selected according to the emission spectra of different fuels, and triple infrared (IR3) is widely used.
Explosion proof grade: cenel EC eexd Ⅱ BT5;
Sensitivity: 0.1m2 combustible medium (gasoline, diesel, aviation kerosene, ethanol and heptane), and the sensitivity can be set with four ranges (15m / 30m / 45m / 60m).
Response time: 2S;
Viewing angle: horizontal - 90 °
Vertical - 90 °;
Power supply: 18 ~ 32V DC;
Power consumption: 200mA (during normal operation);
150mA (in case of alarm);
Self inspection function: automatic and manual;
Signal output: 4 ~ 20mA DC;
Relay contact: Alarm - 2A, 30V DC or 250V AC;
Fault - 2A, 30V DC or 250V AC;
Cable outlet thread: standard 3 / 4 ″ (1 ″ = 25. 4mm) 14npt thread;
Working temperature: - 40 ~ 70 ℃;
Weight: 3.5kg; 6. 5kg (made of stainless steel and cast aluminum).

Fully Automatic Inspection Machine for lighters-the equipment loading and unloading are all automatically loaded and unloaded by a manipulator. The intelligent system can automatically fine-tune the fire ring according to the process requirements to reach the required flame size, and automatically pick out the defective products to ensure that the inspection is good Qualified products will not have defective products, ensuring long-term quality assurance.

Material: stainless steel + aluminum
Product size: 2.35m*1.2m*1.55m
Voltage: AC220v
Air pressure: 0.6mp
Power: 2750w
Weight: 350kg
Device model: FT-JY-10
Output: 8000-10000
Operating staff: 1

Process Description
1. Match the fixture according to the model.
2. Debug the machine according to customer needs and quality requirements (flame height, ignition rate).
3. After 200 pieces of experimental equipment are produced, 100 pieces shall be self-inspected, and then 100 pieces shall be sent to quality inspection before mass production.

Precautions
1. Operate according to the order requirements in combination with the inspection methods provided by the quality department.
2. Pick up the integrated fire and check if it exists before firing.
     Less air, air leakage and no air and pick out defective products with defects in appearance.
3. Set the inspection machine to the standard flame height according to the order requirements.
     Operate in accordance with the normal requirements for three consecutive fires or three consecutive fires
     Two inferior (specifically based on customer needs).