All Products (Total 116 Products)
Brand: Feituo
Packaging: 50 pieces / box
Supply Ability: Factory direct supply
Min. Order: 1000 Piece/Pieces
Model No.: FT-LD-133
Butane, propane and liquefied petroleum gas are widely used today. They are pressurized and filled into the air storage tank. Once released into the air, they will absorb heat, gasify and expand rapidly, which is very easy to ignite. The most primitive lighters were derived from flint ignition guns. When the trigger...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-CQ-05
status: New
equipment Air pump and pressurization equipment are not required. If the liquefied gas tank is used to connect multiple units, it can also be drained and depressurized automatically. Low noise in working environment. characteristic The lighter is inflated by means of flat push, and the quantity is accurate. vertical...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
As the most basic cutting method, flame cutting is also the most widely used cutting method in China. In view of how to grasp the whole cutting process in order to achieve better cutting quality and effect in the process of flame cutting, Feituo industrial control integrates the R & D and sales experience of...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
When the cutting flame is too strong, the following problems will appear:
① Cut the edge volume field and stick granular droplets;
② The cutting surface is uneven and the roughness becomes worse;
③ Slag sticking at the lower edge of the incision.
The following problems occur when the cutting flame is too weak
① The...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
Flame adjustment according to the different mixing ratio of gas and oxygen, the cutting flame is divided into carbonization flame, neutral flame and oxidation flame. When acetylene is used, when the volume ratio of oxygen to ethylene (o2c2h2) is 1.11.15, the flame formed is neutral flame, which is composed of flame...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-CQ-05
status: New
Push type characteristic The inflator of the flat push lighter can vent automatically, and is equipped with an oil passage, air passage and air leakage alarm device of the charging cylinder. Inflating the lighter with the pedal lever is easy and labor-saving. When the gas is sufficient and quantitative, the compressed...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-JY-10
status: New
The automatic full inspection machine is easier and simpler than the traditional manual inspection. It still ensures stability and reliability under continuous working conditions, high-precision inspection standards, improves production efficiency and improves product delivery quality, which will be of great help to...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
As a fully automated equipment, automatic assembly machine is used by many enterprises. In the process of daily use, does it have easily worn parts? Xiaobian tells you that there are. Let's give you a brief introduction:
The worn parts of the automatic assembly machine are mainly the batch head and suction nozzle, of...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-MF-200
status: New
This meter valve assembly machine equipment is controlled by PLC controller, when rotating the face valve is not a single direction of simple rotation, we use PLC to set a moment of positive and negative conversion.
For example, when we screw it, when it is hard to screw, we slightly reverse a circle and then turn...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-MF-200
status: New
The automatic assembly machine avoids corrosion and maintains the metal appearance
The surface of the automatic equipment of the automatic assembly machine shall be inevitably in contact with the surrounding media (such as air, water humidity, water vapor, corrosive gas and liquid, etc.), so that the metal surface of...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-MF-200
status: New
Full-automatic lighter assembly machine from the perspective of the causes of defects, non-standard automation equipment can be divided into hard defects and soft defects, and the two defects can also exist together; Other disadvantages can also include static and dynamic disadvantages. Static disadvantages are...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-MF-200
status: New
Automatic assembly machine reduces temperature
Automatic assembly machine automatic equipment smoothing agent can reduce the friction coefficient and reduce the occurrence of friction. We know that the work done by the running machine to restrain friction is all converted into heat, part of which is dispersed outward...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FB-5
status: New
What industries are involved in non-standard automation equipment? Mainly the following:
1. New energy battery manufacturing;
2. Manufacturing and installation of auto parts in automobile manufacturing industry;
3. Production, transportation and packaging of food industry;
4. Product transportation of electronic and...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
Replica Production of Electronic Lighter disadvantages of power supply:
This disadvantage is a static disadvantage. Most of these shortcomings are caused by the open circuit of the power line or the wrong connection of the ground wire, or the poor contact. Of course, it is also possible that the input voltage of the...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
Reduce employment costs, reduce management expenses and industrial injury risks, and ensure the quality of products. There will be no material waste and too loose or too tight, which are adjusted accordingly.
What are the disadvantages of non-standard automation equipment in the application process? With the...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
The worn parts of the automatic assembly machine are mainly the batch head and suction nozzle, of which the batch head wears the fastest, mainly because it often contacts the material, and there is friction between its rotation and the material, so the metal powder will adhere after a long time. The solution is also...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
Non standard automation equipment is a good choice for the application of equipment automation in the pharmaceutical field. As more and more enterprises pay attention to the field of automation, it has brought development opportunities to the non-standard automatic machinery industry.
Non standard automation equipment...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
Although non-standard automation equipment is not as large as standard equipment, it has a variety and serves a variety of departments. With the rapid development of social science, the new technological revolution puts forward higher requirements for mechanical design. Due to the variety of non-standard automation...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
In the design of non-standard automation equipment, we should also adhere to the humanized design concept, repeatedly measure whether the use of equipment conforms to the use habits of workers, and pay more attention to details.
Non standard automation equipment is a good choice for the application of equipment...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
This requires that non-standard design engineers must have good professional quality, broad knowledge, good flexibility and originality, be good at drawing inferences from one instance, have more ideas, have original opinions, and transplant and integrate other institutions into their own design intention.
1. In the...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
When lighter flame size automatic adjustment machines cutting very thick metal, it is made at an inclination angle of about 10 ~ 20 with the gold surface to be cut, so as to better heat the edge of the cutting part and make the cutting process easy to start. When cutting metal with thickness less than 50mm, the...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-FBZ-200
status: New
This lighter automatic assembly equipment is controlled by PLC controller, when rotating the face valve is not a single direction of simple rotation, we use PLC to set a moment of positive and negative conversion.
For example, when we screw it, when it is hard to screw, we slightly reverse a circle and then turn...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
Lighter flame size automatic adjustment machines operating skills: gas cutting operation can be different due to different personal habits. Generally, the right hand holds the cutting torch handle, and the thumb and index finger of the right hand hold the valve for preheating oxygen, so as to adjust the preheating...
Brand: Feituo
Packaging: Wooden box
Supply Ability: Factory direct supply
Model No.: FT-TH-10
status: New
Preparation before gas cutting
When cutting metal surfaces, rust, dust or oil stain shall be carefully removed. The damaged cutting parts shall be leveled to facilitate heat release halo and slag removal. Never cut on the cement floor, because the cement floor will crack in case of high temperature. The specific...
